General information

S-Light modules and transceivers are aimed at short distance (<500m), high data rate communication (>1Gbps) on multimode optical fibers.
S-Light products offer the following key features : mechanical integration, low power consumption, operation within severe environments.
S-Light modules integrate state-of-the-art 850-nm AlGaAs VCSEL and GaAs PIN photodiode chips and low power consumption CMOS electronics. S-Light optical interfaces consist of either 50/125 or 62.5/125 µm multimode optical cable pigtails terminated by the end-user specified optical terminus or connector.
The S-Light family complies with AEEC / ARINC 804 transceiver specifications.
S-Light modules are protocol independent and can be applied to Gigabit Ethernet, Fibre Channel, Infiniband or any specific communication application.

S-Light available references

SLM-250-IQ-Pyz: 850nm 0.1 to 3.125 Gbps pigtailed optoelectronic transceiver

SLT-250-IQ-Pyz: 850nm 0.1 to 3.125 Gbps pigtailed optoelectronic transmitter

SLR-250-IQ-Pyz: 850nm 0.1 to 3.125 Gbps pigtailed optoelectronic receiver

Future products

S-Light family main features versus competitors
 
 

Notes:
 1 Operation with degraded performances
2 Max power consumption occurs at 90°C for S-Light transceivers
3 Pavg variation remains below 1dB on the specified operating temperature range for S-Light
4 For BER = 10-12 @ 2,5 Gbps, PRBS = 27-1, NRZ.
5 Including 2x900µm 30cm long pigtails and 2 LuxCis connectors

  Typical SLM-250-IQ-Pz available budget link over temperature
 

 
All contents © D-Lightsys 2005 All rights reserved