 |
|
|
|
|
|
|
|
|
 |
|
|||||||
 |
 |
 |
|
|||||
 |
 |
|
||||||
 |
|
|||||||
 |
 |
 |
 |
 |
|
|||
 |
|
|||||||
|
|
||||||||||||||||||||||||||||||||||||||||||
  |
|||||||||||||||||||||||||||||||||||||||||||
Product description
Back to top |
|||||||||||||||||||||||||||||||||||||||||||
D-Light DLT-xx-250-yQ-Pz parallel optoelectronic
modules transmit high data rate signals on either 4, 8 or 12 independent
channels. DLT-xx-250-yQ-Pz
modules integrate state-of-the art 850-nm AlGaAs VCSEL arrays and
are optimized for low power consumption (<125 mW for each transmitter
channel). DLT-xx-250-yQ-Pz electrical interface consists of a 48-pins
QFN package. DLT-xx-250-yQ-Pz
maximum bit rate is up to 3.125Gbitps/ch. The module is 3.3 Volts
single supplied for low power consumption. The module dimensions are
16x16x3 mm. |
|||||||||||||||||||||||||||||||||||||||||||
|
Applications |
|||||||||||||||||||||||||||||||||||||||||||
|
Sensors interconnects Numerical video
transmission Board-to-board
communications Severe environment
interconnects |
Up to 3.125 Gbps per channel 4, 8 or 12
independent transmitters in a single package Each channel
complies with IEEE Std. 802.3z Gigabit Ethernet 1000 Base-Sx PMD requirements Also suitable
for Fibre Channel, Infiniband and VSR-1 requirements Operation over
the industrial temperature range [-40;+85°C] Standard electrical
SMT interface Small package
size (16x16x3mm) Pigtailed optical
connectics Low power consumption |
||||||||||||||||||||||||||||||||||||||||||
|
Principal Parameters
Back to top |
|||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||
| Notes:
1.
Power consumption per Tx channel operating at full speed. xx corresponds
to the number of channels
in the module. |
|||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||
| Notes:
1.
DLT-xx-250-yQ-Pz transmitters are not Class I laser products according
to IEC 60825-1 standard.
2.
Output optical power can be adjusted by the user through a 2-Wire
serial interface.3.
Over the specified temperature range |
|||||||||||||||||||||||||||||||||||||||||||
|
Available Products
Back to top |
|||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||
|
Evaluation Board
Back
to top |
|||||||||||||||||||||||||||||||||||||||||||
| An evaluation board (ref : EVB-DLT/01) is available for parallel tranmitters testing. A module holding tool (ref HT-DLM-v1.0) permits module testing without soldering up to 3.125Gbps. |
|||||||||||||||||||||||||||||||||||||||||||
All contents © D-Lightsys
2005 All rights reserved